• HVI-Certified ventilation fan soffit termination discharge system designed for fans up to 110 CFM, using 4" ductwork. • Designed for maximum fan flow performance by reducing total system pressure drop. • Designed for pre-soffit installation. • Enables complete ducting before soffit panel install. • Eliminates water intrusion costs associated with roof and/or wall terminations.
Housing:
• Overall height is less than 6" and will fit in a 4-1/2" pitch roof overhang (with 2x6 fascia board). • Fits in a narrow 12" soffit (10.5" fascia to building). • EZ Soffit vent body snap-fits into mounting bracket and can be rotated 180 degrees to align with ducting. • Low resistance backdraft damper eliminates cold drafts and improves blower door test results. Mounting • Mounting bracket can be located anywhere there’s a vertical surface within the overhang. • Duct connection stub is 2.25" in length allowing plenty of surface area for connection and sealing. • Flush mounted termination grille mounts with a single fastener (included).
Architectural Specifications:
HVI-Certified soffit termination system designed for ventilation fans up to 110 CFM, using 4" ductwork. Allows for complete ducting prior to soffit panel installation. Vent body snap-fits into a mounting bracket and is able to rotate 180 degrees to align with ducting, and incorporates a built-in air-tight back draft damper. Minimum overhang specification: 4/12 pitch, 12"soffit (10.5" fascia to building), and 2x6 fascia board
